Products \ Penetration and contact materials

Deep penetration coating for absorbent bases, or bases requiring deeper reinforcement, before the laying of ceramic wall files and floor tiles by the use of cement adhesive materials, insulating coatings, and stoppers. Penetration reduces and consolidates absorption of the base, and increases its cohesion. In this manner, it ensures a sufficient open time of adhesive materials and their cohesion to base structures. Suitable for gypsum plasterboards.

INTENDED USE: Water-borne polymer dispersion, intended (in a prescribed concentration) for penetration and closing of absorbent surfaces of base structures before application of anhydrite, cement, and concrete screeds, stoppers, cementing materials, levelling and self-levelling screeds, in both internal and external environments. This coating reduces absorption and reinforces the surface of the base. With self-levelling screeds, it improves flowing properties and increases their binding force.

INTENDED USE: Contact bridge on the basis of solvent free synthetic dispersion, intended for smooth and compact bases (glass, ceramics, and formica). Silica sand bedding with a fraction of 0.6/1.2 mm is recommended. Suitable for use in both external and internal environments.

INTENDED USE: Contact bridge for the treatment of very smooth and non-absorbent bases (glass, sheet metal, smooth concrete surfaces, and the like). It equalises absorption of bases and, with its increased roughness, significantly increases cohesion of cement, stopper, or plaster. It is not suitable for bases from stainless steel. The maximum recommended thickness of the layer is 1 mm.

INTENDED USE: Improved properties of screeds, mortars, levelling compounds, adhesive and jointing materials. It increases adhesion, abrasive resistance, frost resistance, bending strength, and elasticity. It improves pot life and reduces the cement-water ratio and subsequent absorption of final material.